Finally finished my first GameCube portable, spread of 2 years of building I present to you the GC - LYNX
Its a Atari Lynx II Shaped GameCube and works really well. Very stable and sturdy. Thanks to its wonderful vga capability's and screen its a treat to play on.
• Case made out of an Atari Lynx 2 console, shape preserved as much as possible • Retro GameCube blue/purple look paint job with glossy finish • GameCube pal motherboard inside • Very silent IBM fan, heavily modified for optimal airflow • All original Nintendo controls and sticks • Full analog trigger (L and R buttons) • 4.3 Inch widescreen VGA Screen 480 x 272 Resolution • Original Nintendo Component video chip wired to produce VGA out • Shielded Composite video wire to reduce interference. • Wiikey Fusion modchip flashed with Swiss Autoboot firmware • 6400 mAH batteries, 3 hours gameplay • Battery Indicator with 5 leds to see how much power is left • 128 MB Memorycard soldered directly onto the motherboard (GameCube slot-A) • SD Gecko adapter to run homebrew and emulators through Swiss (GameCube slot-B) • Stereo sound speakers, Used 2x iPhone 4 speakers for very clear sound • Switching Stereo headphone jack • Analog volume control • Video controls to access display menu and switch between AV (composite) and VGA Display • System can play from wall socket while being charged (comes with charger and power adapter • Weight about 700 gram • Size (w) 235mm x (h)114mm x (d)50mm or 9.25"(w) x 4.5"(h) x 2"(d) • Comes with 1 x 64GB SD card for GameCube games (wasp fusion slot) and 1 x 32GB for Homebrew, Games and Emulators (GameCube Slot-B)